LGC440-1.5 DC Motor Control

LGC Series

The LGC series is our most widely used series for general purpose 90/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration rate, current limit, speed regulation, and minimum speed of your motor. With abilities to accept 115 or 230 VAC single phase power, run permanent magnet or field-wound motors, the LGC series can easily satisfy most of your motor driving needs.

$567.13

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
LGC440-1.5	NEMA 4X	1.5	115	0 - 90	1/20 - 1/8	.04 - .09	50 / 100	No	No	No
			230	0 - 90	1/20 - 1/8	.04 - .09	100 / 200
				0 - 180	1/10 - 1/4	.07 - .19

Features

NEMA 4X Enclosure: Water resistant and dust proof enclosure
Field Supply: Voltage output to energize the field winding of a shunt-wound motor
Stopping Modes: Inhibit (N.O.) for coasting to a stop. Can be used for frequent starting and stopping
Diagnostic LEDs: Current Limit
Case LEDs: Power
Pre-Wired Switches: ON/OFF

Technical Data

1.37 Form Factor
1% Base Speed Regulation
60:1 Speed Range

Trim Pots

Maximum Speed
Minimum Speed
Acceleration
Deceleration
Current Limit
IR Compensation

Quick Start Guide

User's Manual

2D .DXF File

3D .IGS & .STEP Files