RGA440-10 DC Motor Control

RGA Series

The RGA series of 4Q drives is well suited for applications that require the control of overhauling loads, frequent reversing or breaking. With on-board fusing and cage clamp power and logic terminals, installation has been made simple. Available in either open chassis style or in a NEMA 4X enclosure, the RGA series can be used in a wide range of environments. With the available field supply for shunt-wound motors, full assortment of adjustments that are standard on all our 4Q drives, and optional factory installed isolation module, the RGA series is a flexible and well equipped member of our 4Q family of drives.

$1,052.47

Qty:

Contact the factory for volume pricing

Model Number	Enclosure	Maximum Current (ADC)	Input Voltage (VAC)	Output Voltage (VDC)	Power Range		Field / Shunt Supply	Braking	Reversing	Isolation
					HP	kW
RGA440-10	NEMA 4X	10	115	0 - 90	1/8 - 1	.09 - .75	50 / 100	Yes (Regenerative)	Yes (Regenerative)	No
			230	0 - 90	1/8 - 1	.09 - .75	100 / 200
				0 - 180	1/4 - 2	.19 - 1.5

Features

NEMA 4X Enclosure Water proof and dust proof enclosure
4Q Reversing: Regenerative / 4-Quadrant drives have the ability to perform quick and contactorless braking and/or reversing-on-the-fly
Field Supply Voltage output to energize the field winding of a shunt-wound motor
Stopping Modes: Inhibit (N.O.) for braking to a stop. Enable for coasting to a stop. Can be used for rapid starting and stopping
Tach Feedback: Accepts tachogenerator feedback for tighter speed regulation
On-board Fusing Drives include on-board fusing
Pre-Wired Switches ON/OFF, FORWARD/BRAKE/REVERSE

Technical Data

1.37 Form Factor
1% Base Speed Regulation over 50:1 Speed Range
0.1% Base Speed Regulation over 60:1 Speed Range with Tach

Trim Pots

Maximum Speed
Minimum Speed
Forward Acceleration
Reverse Acceleration
Forward Current Limit
Reverse Current Limit
IR Compensation
Deadband
Tach

Product Downloads

Quick Start Guide

User's Manual